Maytag washers are designed to be reliable and efficient, but like any appliance, they can occasionally encounter issues. When a problem arises, the washer will display an error code to help diagnose the issue. Understanding these error codes can help you troubleshoot and resolve problems quickly, ensuring your washer returns to optimal performance.
Common Maytag Washer Error Codes and Their Meanings:
- F0 E1 – Load Sensing Error:
- Description: This error indicates a problem with the load sensing system, which detects the size of the load in the washer.
- Solution: Ensure the washer is not overloaded, redistribute the load, and try restarting the cycle. If the error persists, there may be an issue with the load sensor that requires professional service.
- F0 E2 – Over Suds Error:
- Description: This error occurs when there are too many suds in the washer, typically due to using too much detergent or the wrong type of detergent.
- Solution: Run a cycle without any detergent to remove excess suds. Use high-efficiency (HE) detergent in the correct amount for future loads.
- F5 E2 – Lid Lock Error:
- Description: This error indicates a problem with the lid lock mechanism.
- Solution: Ensure the lid is closed properly and not obstructed. Check for any damage to the lid lock and its connections. Reset the washer by unplugging it for a few minutes, then plugging it back in. If the issue persists, the lid lock mechanism may need to be repaired or replaced.
- F8 E1 – Water Supply Error:
- Description: This error occurs when the washer detects a problem with the water supply, such as low water pressure or no water.
- Solution: Ensure both water supply valves are fully open. Check the water inlet hoses for kinks or blockages. Verify that the home’s water supply is functioning properly. If the error persists, there may be an issue with the washer’s water inlet valve.
- F9 E1 – Drain Pump System Error:
- Description: This error indicates a problem with the washer’s ability to drain water.
- Solution: Check the drain hose for kinks, clogs, or blockages. Ensure the drain pump filter is clean. If the washer still does not drain, the drain pump or related components may need to be inspected and repaired.
- F6 E2 – Communication Error:
- Description: This error occurs when there is a communication issue between the main control board and the motor control board.
- Solution: Ensure all wiring connections are secure. Reset the washer by unplugging it for a few minutes, then plugging it back in. If the error persists, professional service may be required to diagnose and repair the communication issue.
